Need a switch panel that works without wires, lasts long, and lets you pick colors? Try the MICTUNING P1s-AC Wireless RGB Switch Panel. It helps control lights, winches, and more in trucks, RVs, or boats. Here's why it's good and how to pick between the 8-Gang and 12-Gang versions.
Why MICTUNING P1s Wireless Switch Panel Stands Out?
1. Wiring Made Easy
- Use the panel as a remote (up to 165ft for 8-Gang / 265ft for 12-Gang) or fix it in place.
- Easy to set up the power hub: Connect to your car battery or ACC power quickly.
2. Colorful Lights & Easy Settings
- Pick from 8 colors or modes like changing colors, jumping colors, or slow breathing colors.
- Adjust brightness from dim (good for night) to bright (good for day).
- Choose how switches work: always on, press-to-activate, strobing or flashing.
3. Strong and Waterproof
- Works in rain, mud, or dust (IP65 rating).
- Handles very cold (-40°C) or very hot (105°C) weather.
- Aluminum alloy shell stays strong on rough roads.
4. Powerful for Big Jobs
- 8-Gang: Max power 720W@12V or 1440W@24V, max current 60A.
- 12-Gang: Max power 960W@12V or 1920W@24V, max current 80A.
- Battery lasts 14 days standby. Charges full in 2-3 hours with USB-C cable.
5. Everything Included
- Comes with labels, fuses, screws, brackets, and tools. No extra parts needed.
8-Gang vs. 12-Gang: What's Better for You?
Pick 8-Gang If:
- You need basic control for lights or small devices.
- You want to save money but still get wireless features.
Pick 12-Gang If:
- You run big devices like winches, fridges, or sound systems.
- You need more switches and more power.
What Users Say
Installation Tips
1. Put the antenna on the car's right A-pillar for best signal.
2. Wire up both battery & ACC power(preferred) for easy power switch.
3. Clean the panel before sticking labels.
Free Extras Right Now!
- 140 Labels + 5 Spare Fuses
- USB-C Cable
Common Questions
Q: Can I swap fuses?
A: Yes, BUT always use a new fuse with the SAME or LOWER amperage as the old one. For instance, replace a 30A fuse with another 30A or less; to replace a 5A fuse, do NOT use a 10A fuse.
Q: Why won't it charge?
A: Try a different USB-C cable. Some phone chargers that use a Type-C to Type-C cable may not be able to charge the panel due to an internal recognition chip.
Q: How to check panel battery?
A: Hold the ON/OFF button. Three white lights = full battery.
Q: The power hub has a black wire antenna. Can it be disconnected?
A: It cannot be disconnected. It’s recommended to let the antenna extend outside the box for better communication range.
Shop Now! → MICTUNING P1s Wireless Switch Panel
