MICTUNING MS-W Slim Wireless Switch Panel, Up to 208FT Range, 6 Gang/8 Gang Toggle Momentary Strobe Pulsed Flash, RGB Dimmable Backlit

Really love the wireless. And its easy to install.

This thing is awesome. Works just like it should and controls all the lights on my Golf cart. The wireless controller is a game changer. No wire to run to the controller. The fuse block is compact and can fit almost anywhere. -from amazon

Installing this in a 2016 5.7L Hemi Jeep Grand Cherokee (WK2) requires planning because the battery is tucked under the passenger seat and if you've ever looked under the hood of a WK2 with a Hemi there's not much additional room for anything, even the battery.

The Problem: The kit includes high-quality copper power lines that look like they're right between 6 and 8 gauge (about 3.6mm Diameter), but they are only about 20 to 24 inches long. While that works for most engine-bay installations, it won't reach a WK2 battery under the passenger seat.

The Overkill Solution: I swapped them for 0-gauge Copper Clad Aluminum (CCA). I Even made a custom grommet to get through the firewall with those huge cables. Stepping up to massive 0-gauge ensures I'm moving just as much "juice" as the 6-8-gauge copper wires that comes with the kit, even over the long distance to the battery box under the pass seat.

Technical Specs: The Control Hub
The control box features a 1-to-1 fuse-to-button ratio. Looking inside the hub (see photos), the 8-button version features 8 automotive-style fuses: (2) 30A, (2) 20A, (2) 15A, and (2) 10A Fuses.

Manual Note: The instructions in the box are for the 4/6-button versions. The 8-button logic is similar but not identical, so keep that in mind during the install.

The Master Plan: 8 Buttons, 0 Left Over
I've already accounted for every single button on this controller with a massive set of MICTUNING gear and custom electronics:
Main Pods: Two sets of K8 Light Pods (with the flowing halos).
Ditch Lights: A set of K6 Driving Lights (270° side-shooters).
Front Bar: Lower grill light bar.
Underglow: A 16-pod Q2 Color Zone Rock Light kit.
Rocker Lights: 3-strip Red LED Rocker lights mounted to the pinch weld to reflect off the Chrome Nerf bars.
Audio Trigger: Using one button as a remote turn-on for my under-seat sub and 100W RMS Class D amp and Marine 6.5in round speakers I added in the tailgate.
Air Horn: Wiring an air horn under the back of the Jeep using the Momentary Mode.
Interior/Accent: Interior dash/door trim kits
And a full-length Hood LED strip tied into the DRL circuit and K6 & K8 Halos.
Pro-Level Mounting & Stealth Antenna
The "Front-Exit" Trick: I mounted the box on the factory fuse box lid with the wires exiting the front. This gives enough slack to use the harness to prop the lid open against the fender for maintenance and prevents the wires from being pinched at the rear hinge.

Stealth Antenna: I tucked the antenna under the plastic wiper cowl directly beneath a ventilation slot. It's 100% hidden but still pulls 130 feet of range through the slotted plastic.

Dash Mat Hack: The "hook" side of the provided Velcro sticks perfectly to my polyester dash mat. It's now rock-solid right above the 8.4-inch Uconnect screen.

Final Verdict
The MICTUNING MS-W 8-Gang is professional-grade gear. Between the four control phases (Toggle, Momentary, Flash, Strobe) and the massive range, it's one of the only ways to manage all my custom lighting without drilling holes in the dash or cluttering the cabin with wires. Definitely worth going with the wireless setup. MICTUNING= PROFESSILNAL QUALITY. -from amazon

There's a lot to like here, and a few minor feedbacks. First of all, the overall build quality is solid. I replaced an Auxbeam AS-R60 that I had installed for about a year with this Mictuning 8 gang version. Note that I've also previously had a P4-Mictuning NEON 4 Gang Switch and a MICTUNING P1C RGB 8 Gang Switch. The main difference with this model is that the switch is wireless. Meaning you don't have to run anything through the dash, and you can take the switch with you- around camp, into your tent, etc.

Because I was removing a system and replacing it with this Mictuning one, it was pretty straightforward and quick. I took out the old Auxbeam and put in the new Mictuning one in about an hour start to finish.

I went a step beyond for the switch panel itself. I designed and 3d printed a mounting solution that works with Ram Ball mounts. I'm currently running 6 items (lights, horn, chase, etc) and have room for 2 more items to control. The remote works well, no issues with connection for over 75 ft. I mounted the antenna inside the engine bay, laying horizontal. Thankfully it has a magnet (as well as 3M adhesive option). Because this has 8 items to control, the terminals are split 4 and 4 on each side of the control box. This means your wiring won't look as clean as the 6 or 4 gang options, but I can't fault it that much. I will say that I was missing a rubber grommet that goes on the fuse box lid to route the wires through for a clean, tight seal - couldn't find it anywhere, not sure what happened.

They should make a small improvement to include steel backing plate or another bracket option that is more modern thatn double stick tape/velcro or the big clunky bracket.

I haven't gotten to dive into the app and remote/BT control yet, -from amazon

This worked perfectly for my needs. I'll probably have to pick up another one because I have more bright ideas.

Easy to install and the quality is great. Watch the YouTube videos on installation. Fits on my new Ranger and powered up my fog lights and grill lights. I will be adding more devices to the switch as I get them. Wireless switch means I didn't have to feed a wire through the firewall.. Will post again after I have used the switch panel for a while.
-from amazon

Absolutely amazing and extremely easy to install. Definitely a game changer. Look forward to purchasing more products from them.

Nice product simple to install.

Well, I've had this all set up and have been playing with it for a month or so and I will say that this is a great product. Hooking up was easy as can be. Not that I needed them but it came with pretty decent color instructions. Its nice to have several selections /modes to choose. From choice of colors of the buttons to the functionality of each button.
Great product guy, I highly recommend. -from amazon

Packaged very well arrived on time, and undamaged. This is a very nice wirless cabin switch. It has 8 switch spaces well constructed not quality very durable. Works flawless! -from amazon

Absolutely met my needs! Install is very straight forward and the rechargeable battery is awesome and has an on off switch so you don't wear the battery out super quickly. Overall I've had several and this is the best I've owned yet! -from amazon

This is a great choice if you are running a bunch of electronics in your vehicle. Whether that be a truck, car, utv, rv or whatever else.

If you have a wide array of accessories and want wash control then this is the set up for you. This wireless switch panel has good range. Makes wiring things like underflow and spotlights far simpler and cleaner overall and doesn't require permanent modifications.

You can customize things using the stickers, adjusting the colors etc and the build quality is there as is the value.

Installation is a simple affair and it makes installation of accessories far simpler. For the price it's a great set up and well worth it in my opinion.

Until We Meet Again
-Off The Grid Ken -from amazon

This unit does not disappoint, install was super easy. Looks amazing, and works better than a bunch of clunky relays and switches. The wireless functionality is a game changer..no running wires through the fire wall. One slight hiccup was I wired the antenna too close to my pod light power wires when I turn them on the wireless range dropped significantly. I will be relocating the antenna away from power wires. Overall a great price and a superb product. -from amazon

The MICTUNING MS-W Wireless Switch Panel is a professional-grade circuit relay system designed for streamlined control of auxiliary lights and accessories. This system features a slim, space-saving control panel that communicates wirelessly with the relay box, offering a control range of up to 208 feet. By eliminating the need to run wires through the firewall, it allows for a drill-free installation in cars, trucks, RVs, UTVs, and boats.

The system is engineered for high-performance power management, supporting a maximum current of 60A (720W at 12V or 1440W at 24V). Each of the 8 buttons can be set to one of four distinct control modes, color-coded for easy identification: Toggle (Red), Momentary (Blue), Flash (Purple), and Strobe (Green). Additionally, the panel features a dimmable RGB backlight with eight color options, which automatically adjusts its brightness based on ambient light levels to ensure visibility without glaring during night driving.

Constructed from durable aluminum and rated IP65 waterproof, this relay system is built to withstand extreme environments ranging from -40��F to 221��F. Whether you are managing off-road lighting, winches, or onboard compressors, the MIC-MS-W800 provides a centralized, rugged, and aesthetically clean solution for modern vehicle power management. -from amazon

Works great and looks great. I would and have recommended to anyone that is looking for a switch.

I really like the design of this wireless control panel; it offers greater flexibility in terms of installation placement. The fact that it requires no drilling is a major plus for me-I certainly didn't want to riddle my car's interior with holes just to install a switch, so having such a hassle-free alternative is truly convenient. The 8-channel control capacity is more than sufficient for most users, allowing for the separate management of various devices; the interface is intuitive and easy to read, making for a smoother user experience during daily use. The 208-foot operating range is also quite impressive-more than adequate for everyday needs-and the response time is solid, ensuring you never experience that frustrating lag where you press a button only to wait ages for a reaction. It supports various modes-including momentary, strobe, and pulse flashing-which proves particularly practical for those with auxiliary lights, ambient lighting, or custom modification needs; this offers a wider range of creative possibilities beyond just simple on/off switching. Finally, the adjustable RGB backlighting is a nice little bonus; it makes the buttons easier to see at night and allows you to customize the lighting to your personal taste, adding a distinct high-tech aesthetic to the interior. -from amazon

This is a really slick setup if you don't want to run a ton of wires. The wireless control works surprisingly well and the range is more than enough for most installs. The panel looks clean and the RGB backlighting is a nice touch without being over the top. Installation is much easier than traditional switch panels. Great for trucks, UTVs, or any custom setup. -from amazon

I got these for our old flatbed pickup as I use it on the deer lease. This way, I can turn all the lights on and off when I need to. Also turn off the power to the winch when not in use so it won't run the battery down.
I like that I can walk around with the panel in my pocket. Lets me turn lights off and on whenever.
I took the panel in the lease bunk house and even though it was about 100 ft from the truck, it still worked.
Being lazy, but it sucks to get inside, boots off and get comfortable only to realize one of the lights was left on and will kill the battery over night. Now I don't have to get dressed to walk out there to turn it off. -from amazon

I have used other products from this brand before and have always had good results, and this switch panel continues that trend. It is a well thought out system that offers features you typically have to spend quite a bit more to get.

The wireless functionality is one of the standout features. The range is excellent and I am able to activate lights from inside my house at around a hundred feet away without any issues. Response is consistent with no noticeable lag or missed inputs.

Installation is straightforward with the no drilling setup, and the overall design is compact and easy to place where you want it. The panel itself feels solid, and the control box is built to handle real use without feeling cheap.

The different control modes and adjustable backlighting add a lot of flexibility, making it easy to tailor it to different accessories and setups.

Overall, everything performs exactly as it should. It is a reliable, feature rich controller that delivers strong value compared to similar systems. -from amazon