P8Y Ultra RGB Switch Panel with App & 230FT Remote Control, 6/8 Gang , IP67 Waterproof, Auto-Dimming

I picked up the MICTUNING P8Y for my truck and it's been a huge upgrade to how I manage accessories. Instead of a mess of individual switches and relays, everything now runs through one clean panel. The wiring was straightforward, and they include everything you need right in the box-wires, fuses, hardware, even zip ties.
What really stands out is the customization. The RGB backlighting lets me match the rest of my interior, and the brightness adjustment means it's never distracting at night. The Bluetooth app control is a bonus-I can flip lights or accessories on and off without even being inside the truck.
The panel feels sturdy, waterproof, and built to last. With 8 available slots, I have more than enough room to add future gear without worrying about running out of space. Overall, it's a clean, modern solution that keeps the setup simple and reliable. -from amazon

The Mictuning switch panel works great. Super clean layout, the wiring was straightforward with clear instructions, and the build quality is solid. It comes with a ton of stickers to label the illuminated bottoms and remote works from pretty far away . Definitely would recommend. -from amazon

What is great about this power hub, push button control, is that you can mount the power hub under the hood of your vehicle, and run all the wires from your lights and other accessories to the power hub under the hood. There is no need to run all the wires to switches on the inside dash of your vehicle. HOWEVER, note that the push button control has a thin cable that runs from it, to the fused connection control that most likely will be mounted under the hood. This requires a hole through the firewall of about 5/16 of an inch, for the cable connector to fit through. Complete installation is pretty easy.

For wireless remote control, a separate switch control is include, or you can use the app on your phone.

I mounted the power hub to the top of my fuse box under the hood of my Ram 2500 truck. I left the wires long enough to be able to get the cover off the fuse box. The antenna, I just stuck on with the magnet under the hood. I probably loose some operating range by having the antenna under the hood, but I don't need the full 230 foot range. It works fine from the inside of the truck and at some distance from the outside.

You can program the push buttons to operate on-off, momentary, (on as long as you push the button down, like for a horn), flash, or strobe function. You can use connected lights as emergency lights with the strobe or flash function. I have connected amber fog lights that I can strobe or flash if I want to use them for emergency warning lights. You can have rear facing amber lights that you can strobe or flash for emergency lights, or chase lights. There are many possibilities with this control setup.

There are included stickers to label the buttons on the push button unit, and they cover just about any possible accessory, or added lights. -from amazon